| Minimum Depth | Full Recess Depth | |
| 1" Horizontal | 1" Inch | 1 1/2" Inch |
Inside Mount: Measure inside the window frame.
Minmum depth of 1" is required. View depth chart for more information.
Outside Mount: Measure from edge of the molding to the other edge of the molding.
Add 2" to your height if you plan to mount on the wall, compensates for the hardware.
Keep height as is for frame mount
Measure the Width (side to side) of the exact window frame opening on the top, middle and bottom (A, B, C)
Measure the Height (top to bottom) of the exact window frame opening from the left, center and right (D, E, F)
Measure the Depth of the window frame. Make sure to not include inside molding or tracks, only the space that is available to install your blinds.
Measure the Width(side to side) between the two outermost points of the window frame, or the area which is to be covered.
Measure the height(top to bottom) of the outermost point of the frame to the window sill of the bottom of the frame, or from where ever you want your blind to begin to where you want it to end.
If you’re mounting on the inside, make sure you give an EXACT window opening measurement. Do not take any deductions. We take a small deduction on all inside mounts to assure the perfect fit.
*The material for all Roller Shades and Solar Shades will measure narrower than the headrail to accommodate the mechanism. It varies on width but could be up to 1 1/4” narrower.
Please call 1-800-blinds7 if you have additional questions or need additional assistance
