Inside Mount: Measure inside the window frame on the top.
We recommended outside mounts for vertical blinds .
Minmum depth of 1/2" is required. View depth chart for more information.
Measure the Width (side to side) of the exact window frame opening on the top, middle and bottom (A, B, C)
Measure the Height (top to bottom) of the exact window frame opening from the left, center and right (D, E, F)
Measure the Depth of the window frame. Make sure to not include inside molding or tracks, only the space that is available to install your blinds.
Measure the Width(side to side) between the two outermost points of the window frame, or the area which is to be covered.
Measure the height(top to bottom) of the outermost point of the frame to the window sill of the bottom of the frame, or from where ever you want your blind to begin to where you want it to end.
If you’re mounting on the inside, make sure you give an EXACT window opening measurement. Do not take any deductions. We take a small deduction on all inside mounts to assure the perfect fit.
*The material for all Roller Shades and Solar Shades will measure narrower than the headrail to accommodate the mechanism. It varies on width but could be up to 1 1/4” narrower.
Please call 1-800-blinds7 if you have additional questions or need additional assistance
Sidewinder: Smooth, effort less lift system evenly raises and lowers shades with the pull of a chain.
Spring Roller: Allows shade to lift up and down without the use of a cord or chain. It Allows unlimited stopping positions.
No Valance: No Valance
Royal Valance: Royal Valance- One continuous 3.5" maching valance with clear trim
Fabric Cassette Val: A fashionable and streamlined way of covering the roller mechanism. The front of the cassette will always come wrapped with the same fabric as the shade it self.
Tip to Tip: The width of your shade will measure from one tip of the hardware to the other tip of the hardware. The material itself will measure up to an 1 1/4” narrower.
